BPS-2 Ultraschall-Antifouling-System 12V
Das BPS-2 ist ein System mit zwei Schwingern, das Rümpfe, Antriebe, Ruder, Stabilisatoren und mehr vor Bewuchs schützt. Dieses Einzelsystem bietet Ultraschall-Antifouling-Schutz für Rümpfe bis zu 9 m Länge oder kann für größere Schiffe mit zusätzlichen Systemen kombiniert werden. Das BPS-2 kann auch zum Schutz von Antrieben und Rudern eingesetzt werden.
Pairs well with
In stock! Ships within 1-2 business days.
Lifetime Warranty
Complimentary shipping
BPS-2 Ultraschall-Antifouling-System 12V
Product details
Technical Specifications
Voltage: 12V DC
Average Power Draw: 0.5Ah
Transducer Strength: 60W
Average Power Draw: 0.5Ah
Cable Length: 15ft per transducer
Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)
Installation Overview
No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
Mounting The Controller: The BPS-2 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
Enjoy Worry Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market.
How the Technology Works
The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
Targeting the Root Cause: These ultrasound waves repel biofouling from attaching from your hull before they ever have the chance to attach.
Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.
Benefits & ROI
Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
Diver Savings: Reduces the need for monthly hull cleaning services.
Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean such as stern drives, sea strainers, and rudders.
Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.
FAQs
How much power does the BPS-2 consume?
The BPS-4 system is incredibly efficient. Each of its four transducers requires just 0.25 Amps, for a total power draw of only 1 Amp when fully active.
Does the system need to run 24/7?
Yes. Marine growth is a constant threat. The system is designed for continuous operation to ensure the biofilm can never establish a foothold on the hull. Its low power draw makes this 24/7 protection feasible without significant battery impact.
Will the BPS-2 clean a hull that is already dirty?
No. Ultrasonic antifouling is a preventative system, not a cleaning system. The hull must be cleaned and free of all marine growth before the system is installed and activated for it to be effective.
Will the system damage my hull?
No. The ultrasonic vibrations are microscopic and do not cause any structural stress, fatigue, or delamination to fiberglass, aluminum, or steel hulls. It is a proven, non-destructive technology.
Does the boat need to be hauled out for installation?
No. Since the entire system is installed from inside the boat, you do not need to haul out.